Klarus XT1C

Back to List
Was: $69.95
Now: $24.99


  • Dual button tail switch for quick, one-hand operation
  • Main switch is easy to find in the dark and will be pressed by default when pressing the tail of the light
  • Mode switch is at a lower level than the main switch and provides good tactile feedback
  • Strobe can be activated with the Mode switch when the flashlight is on or off, giving instant access to Strobe from any mode
  • Forward tactical main switch with momentary activation
  • Maintains constant brightness with very high efficiency
  • Max output: 245 ANSI Lumens on high
  • Max run time: 70 hours
  • Reverse polarity protection protects flashlight and battery from damage when a battery is inserted incorrectly


  • CREE XP-G R5 LED with a lifespan of up to 50,000 hours
  • Three lighting modes and 1 flashing mode:
  •  Lighting modes: 245 ANSI lumens (1hrs)
    •     60 lumens (4 hrs)
    •     4 lumens (70hrs)
    •     Variable frequency strobe: 245 lumens (2hrs)
  • Working Voltage: 1.8-3.2V
  • Battery: 1XCR123
  • Body color: Military grey
  • Reflector: Textured orange peel reflector
  • Switch: Dual button tail switch
  • Tactical main switch for turning the light on and off. Momentary activation from off
  • Dedicated mode switch for instant access to strobe and changing modes
  • Lens: Toughened ultra-clear glass
  • Material:Aircraft grade aluminum
  • Dimensions: 99mm (Length) x24mm (Head) x22.6 (Body)
  • Net weight: 47g (Excluding battery)
  • Waterproof to IPX-8 Standard (underwater to 2 meters)
  • Included accessories: holster, lanyard, and two spare o-rings

Note: The above-mentioned parameters are approximate and may vary between flashlights, batteries and environments; Data was achieved using DURACELL CR123A battery



  •  To activate constant on, press tail/higher switch fully so that it clicks. To turn the flashlight off, press tail switch fully so that it clicks
  •  Changing brightness levels: When the flashlight is on, press the mode switch and then release it immediately; the brightness mode will change: High—Medium---Low
  •  Strobe access

With the flashlight turned off, press the mode switch for instant access to strobe

With the flashlight turned on, press the mode switch for more than 0.6 seconds to access strobe. Release mode switch within 2 seconds to return to your previous lighting mode. Holding the mode switch for more than 2 seconds will lock the light in strobe mode. Pressing the mode switch will stop the strobe mode and return the light to its previous lighting mode.


Join our Newsletter

designed by