Specifications:

• LED Type: Cree XP-E Q5
• Function: Low-Med-High
• Finish: HA Type Ⅲ
• Reflector: Orange Peel
• Lens:Anti-shattering ultra clear lens, anti-scratching and anti-slip
• Water and Dust Resistant to IP68
• Switch: Head Twisty Switch
• Mil-spec: MIL-STD-810F
• Battery: 1 x AAA, 1 x Rechargeable NiMh AAA, or 1 x 10440 (due to the small body size, 10440 batteries are not recommended since it may cause the light becoming hot very quickly). Batteries are not included.
• Three output levels: Low 1.5 lumens (50 hours) -> Medium 18 lumens (4 hours) ->-High 80 lumens (55 minutes)
• Standard Accessories: 1 x Clip, 2 x O-rings, 1 x Manual
• Size and Weight:
  • L 52.5mm (2.07'') x D 16.2mm (0.64'') x W 36.2mm (1.43'') ,
  • 22.8g (Excluding Battery and belt), 50.8g (Excluding battery)
• Operation:
  • Battery installation:
    • Remove the light tail.
    • Insert the battery with the negative end toward the tail.
  • Operation:
    • Insert the battery and tighten the tail
    • Tighten the head clockwise to turn on the headlamp.
    • When the light is on, loosening (counter-clockwise) and tightening (clockwise) the head within 1 second will change the mode between low, medium and high level.
    • After choosing a specific mode, the headlamp will memorize that level and will default to the level when turned on.
    • Loosen the head to turn off the headlamp.